How To Install A Heat Pump Installation Guide

How To Install A Heat Pump Installation Guide

Installing a heat pump is a great option for reducing energy costs. A heat pump installation guide can help you through the process step by step, from purchasing the heat pump to installing it. A heat pump installation guide can also help you decide what type of heat pump you want to purchase. It is important to have the proper sizing for the machine as well as the ground location for the installation. The right size of ground loop and heat pump for your house will also depend on your specific heat desires and the actual size of your house.

There are two types of heat pumps available, those which are air source and those which are air cooled. Air source heat pumps work on the principles of conduction heat and using Freon or refrigerant to transfer heat from inside the house to the outside. Air cooled heat pumps work in much the same fashion, but use a liquid, such as Freon, to conduct heat from the outside into the house. These two types of heat pumps have different installation requirements. An HVAC contractor experienced with both types of heat pumps will be best able to determine which type is best for your house.

Installing geothermal heat pumps is a relatively simple process that can be done on your own with minimal supervision. These heaters work with the earth’s natural heat, instead of a Freon or refrigerant, to heat your water and generate hot water. The amount of heat pumped into the atmosphere depends on factors such as the area, the heat pump is located in, the surrounding climate, and the year-round availability of heat. Geothermal heating requires a more intense installation strategy than air source heat pumps, but is often less expensive.

Although geothermal heating installation is fairly low maintenance, there are some things you should watch for to make sure your system is running at its maximum efficiency. When installing your system, you should make sure all ground loops and return pipes are placed so they can feed the main heat pump. If you find any leaks, make sure they are sealed before the next installation. Also, when the ground loops and return pipes are running cold, this can prevent the flow of heat throughout your entire system.

A heat pump installer can be an invaluable aid during the installation process. An installer has the experience necessary to locate and set up ground loops and can help you with any problems you encounter. If you are unsure of how to install a ground loop or cannot find one to fit your needs, your installer can also recommend a local professional service.

As your new geothermal system begins to heat and circulate air, you should notice little changes in your utility bills. This is mainly because the unit will be taking less energy to run. Over the course of a year, you should notice a significant decrease in your monthly energy bill. With your new system installed, you should have minimal maintenance required and be enjoying your heat and air within days.